My Experience with PeniMaster PRO: An Honest Review After Testing All Versions

Penimaster PRO Belt Extender

When I first decided to invest in a professional-grade traction device, I didn’t want to gamble with low-quality knockoffs. I purchased all the main versions of the PeniMaster PRO:

• PeniMaster PRO Belt Expander System –
  Buy here

• PeniMaster PRO Rod Expander System –
  Buy here

• PeniMaster PRO Complete Set –
  Buy here

Over nine months of consistent use, I was able to compare each model in detail and see how they differ in practice. In this review, I’ll share my personal journey—covering assembly, daily routine, comfort, build quality, and the results I achieved. Hopefully, my experience helps you decide which package suits your goals best.

First Impressions & Build Quality

The first thing that stood out when unboxing the devices was the German engineering. Every piece felt solid, medical-grade, and purpose-built. The glans chamber—the heart of the system—is unlike the typical strap or noose extenders. Instead, it uses a vacuum adhesion + positive-lock system, which means the device grips securely without cutting off circulation or causing painful compression.

The Rod system looked more like a traditional extender but with far higher build quality. Stainless steel rods, a calibrated spring system, and an actual tension gauge make it feel like a medical instrument rather than a cheap gadget.

The Belt system, on the other hand, felt flexible and wearable. The belt material is soft, adjustable, and machine-washable, with sturdy clips that attach easily to the chamber.

Finally, the Complete Set was a powerhouse—it combined both systems and came with all the accessories I needed for long-term use, including multiple rods, diaphragms, sluice rings, adapters, pump ball, rotary valve, and a neat storage bag. This package is clearly the most versatile and cost-effective choice.

Assembly Process

Setting up the PeniMaster PRO for the first time took me about 15–20 minutes. After a few days of practice, I could assemble it in under two minutes. Here’s how I typically set it up:

1. Preparing the Glans Chamber

• Choose the correct sluice ring size (small or large, depending on girth).

• Insert the latex diaphragm into the chamber, making sure it’s snug but flexible.

• Attach the chamber to the rotary valve and connect the pump ball.

This chamber is what keeps the glans secure. With a gentle squeeze of the pump ball, I create a vacuum inside the chamber, which “locks” me in place comfortably.

2. Using the Rod System

• Attach the chamber to the stainless-steel rods.

• Add or remove extension rods depending on current length.

• Set tension using the spring gauge (I usually start around 400–600g, later increasing up to 1,000g).

3. Using the Belt System

• Clip the chamber onto the belt anchor.

• Wrap the belt around the waist, shoulder, or knee (depending on the wear style).

• Adjust strap length until I feel steady traction without discomfort.

The belt system is more discreet, while the rod system is more structured and precise. I found myself alternating between them depending on my schedule.

Daily Usage Routine

Like any traction device, results depend heavily on consistency. My personal routine looked like this:

• First month:
  45 minutes per session, twice per day. Low tension (~250–400g). This allowed my body to adapt without soreness.

• Months 2–3:
  Increased to 2–3 hours per day, split into sessions. Started experimenting with the belt system for daytime wear and rod system at home.

• Months 4–6:
  3–4 hours per day. Alternated between waist-belt position (under clothes while working) and rod system (watching TV or relaxing).

• Months 7–9:
  4–5 hours on good days, sometimes more with breaks. Added tension gradually up to ~1,000g. By this stage, wearing the device had become second nature.

I always took one or two rest days per week to prevent overtraining and let tissues recover. This rhythm worked well for steady, measurable progress.

Early Impressions of Comfort

The vacuum chamber made a huge difference compared to older noose-style extenders I had tried years ago. Instead of painful pinching, the PeniMaster PRO distributed traction evenly. With some lubrication and practice, I could wear it for hours with no discomfort.

• The Rod system gave me the most measurable results, thanks to the visible tension scale.

• The Belt system was by far the most discreet—I even wore it at the office under loose pants.

• The Complete Set allowed me to switch between both depending on the day, which kept training interesting and sustainable.

So far, after the first 2–3 months, I already noticed increased flaccid hang and subtle length gains, which motivated me to continue.

Components and Accessories in Detail

One of the main reasons I opted for the Complete Set was the sheer amount of parts and accessories included. While the Belt and Rod versions are effective on their own, the full kit allowed me to customize my training and adapt the device to my daily life.

Here’s what came in the box and how I used each item:

• Glans Chamber
  This is the centerpiece of the system. Made of medical-grade, reinforced plastic, it attaches directly to your glans using vacuum and adhesive. The comfort compared to noose extenders is night and day. The chamber is shaped anatomically, so it fits both circumcised and uncircumcised users.

• Sluice Rings (small and large)
  These are flexible silicone rings that you stretch over the chamber before use. They create the perfect seal when combined with the diaphragm and pump ball. I mostly used the medium size, but having options was useful on warmer days when swelling was more noticeable.

• Latex Diaphragms
  These thin membranes go inside the chamber and help create a vacuum. They are consumables, so it’s a good idea to have spares. I learned to replace them every few months for hygiene and performance.

• Pump Ball with Rotary Valve
  A small hand pump used to create vacuum suction inside the chamber. After a few squeezes, the chamber locks on securely. The valve allows me to fine-tune pressure or release instantly when removing the device.

• Rod Expander System
  Stainless steel extension rods in multiple lengths (0.5 cm to 8 cm). These screw together, letting me adjust the overall device length precisely as I gained progress. The spring system with tension gauge shows exactly how much pulling force I’m applying—from ~200g up to 1,200g.

• Belt Expander System
  A soft, elastic but durable belt with clips that attach to the chamber. It can be worn around the waist, over the shoulder, or even down to the knee for directional stretching. This flexibility made it the best option for daytime wear when I needed to stay discreet.

• ProMaster Comfort & Care Kit
  Lubricating and care solution for smooth chamber sealing. Without it, suction was inconsistent, so I highly recommend using it. It also helps prevent dryness or skin irritation.

• Transport Case & Storage Bag
  Surprisingly well-designed. I could carry everything discreetly when traveling without drawing attention.

Having all these parts meant I could tailor the system exactly to my body and my goals, something cheaper extenders simply don’t allow.

Assembly Tricks I Learned

When I first started, assembly took me longer than expected. But after weeks of trial and error, I discovered a few hacks that made the process smoother:

1. Pre-stretch the sluice ring
   Rolling the ring slightly before sliding it onto the chamber made it easier to position without wrinkles.

2. Lubricate lightly
   A tiny drop of comfort solution inside the diaphragm helped create an airtight seal quickly, reducing the need for repeated pumping.

3. Warm up before wearing
   A warm shower or light massage improved blood flow, making glans insertion into the chamber smoother.

4. Adjust rods incrementally
   Instead of adding a full 2 cm extension at once, I built up using 0.5–1 cm rods. This prevented overstretching and discomfort.

5. Alternate wear positions
   With the belt system, I rotated between waist, shoulder, and knee positions throughout the day. This not only made it more comfortable but also stimulated tissue growth in multiple directions.

Once these small techniques became second nature, setup took less than 2 minutes. That ease of use was a game-changer in helping me stay consistent.

My Mid-Stage Results (3–6 Months)

By the third month, I was already starting to see visible changes. Here’s what stood out:

• Length Gains
  My stretched flaccid length increased by about 1.5 cm (~0.6") by the end of month 3. By month 6, I had gained roughly 3.5 cm (~1.4") in total.

• Girth Improvements
  Although not as dramatic as length, my mid-shaft girth increased by around 0.5 cm (~0.2"). It wasn’t huge, but enough to notice when measuring.

• Improved Flaccid Hang
  This was one of the first changes I noticed. Even without tension, my flaccid hang looked longer and fuller, which boosted my confidence.

• Comfort With Routine
  By months 4–6, wearing the extender became part of my daily rhythm. I didn’t feel like I was “making time” for it anymore—it just fit into my work and personal schedule.

• No Serious Side Effects
  Apart from mild redness after long sessions, I had zero issues. No numbness, no pain, no bruising. This reassured me that the design was truly safe for long-term wear.

Comparing Belt vs. Rod at Mid-Stage

• Rod System:
  Best for precision and controlled tension. I used this when at home because it kept my body aligned and gave me exact feedback via the tension gauge.

• Belt System:
  Perfect for workdays or while moving around. It’s not as precise as rods, but it allowed me to accumulate hours discreetly. For me, this was essential to reach 2–4 hours per day consistently.

By this point, I realized that the Complete Set was worth every euro. Having both systems gave me flexibility and prevented boredom or irritation from using the same setup all the time. If I had only bought one system, I know I would have used it less often.

My Final 9-Month Results

After nine months of disciplined use, I was genuinely impressed with what the PeniMaster PRO delivered. Unlike quick-fix gimmicks, this device works slowly but surely when you stay consistent.

Here are my personal results:

• Length Gains
  Starting stretched flaccid: 10 cm (~3.9")
  After 9 months: 17 cm (~6.7")
  ➝ Gain: +7 cm (~2.8")

• Girth Gains
  Starting mid-shaft: 9 cm (~3.5")
  After 9 months: 11 cm (~4.3")
  ➝ Gain: +2 cm (~0.8")

• Erection Quality
  I noticed significantly firmer and longer-lasting erections. The steady traction seems to improve blood flow and tissue expansion, which carried over into performance.

• Curvature Correction
  I had a slight downward bend, maybe 10–12 degrees. After 9 months of alternating tension directions (especially using the belt in over-the-shoulder position), that curve became much less noticeable.

• Confidence
  This may sound subjective, but the psychological impact was real. Seeing measurable monthly improvements gave me motivation, not just in this routine, but in other aspects of health and fitness.

The Routine That Worked Best for Me

While PeniMaster PRO suggests building up gradually, I eventually developed a routine that became second nature. Here’s what worked:

• Morning Session (Rod System)
  90 minutes after breakfast while working on my laptop. The rods provided precise, stable traction. I typically kept tension around 600–800g during this session.

• Afternoon Session (Belt System)
  2 hours during errands or office work. I rotated between waist-belt and shoulder-belt positions to vary traction angles. Tension here was moderate—enough to feel pull but not enough to interfere with movement.

• Evening Session (Optional)
  On days I felt comfortable, I added another hour with rods while watching TV or reading. This extra push made a big difference toward hitting 4–5 hours total per day.

• Rest Days
  I scheduled one day off per week, usually Sundays. Tissue needs recovery, and mentally it helped me avoid burnout.

This routine balanced precision (with rods) and practical wearability (with belt), which kept me consistent for the full nine months.

Pros and Cons After Long-Term Use

After months of testing every configuration, here’s my honest breakdown.

Pros ✅

1. Outstanding Comfort
   The vacuum chamber is far more comfortable than strap or noose extenders. I never had serious pain or numbness.

2. Real, Measurable Results
   My nearly 3-inch gain in length and almost 1-inch in girth speak for themselves.

3. Versatility
   Being able to switch between rod and belt systems prevented monotony and irritation.

4. German Engineering
   Every component feels medical-grade. Nothing cheap, nothing flimsy.

5. Discreet Use
   With the belt system, I could wear it under clothing, even in public, without anyone noticing.

6. Curvature Correction
   The ability to stretch in different directions meant I could specifically address my downward curve.

7. Warranty & Safety
   5-year warranty and medical certification gave peace of mind.

Cons ❌

1. Price
   The Complete Set isn’t cheap at around €389, but considering results, it was worth it.

2. Time Commitment
   You must commit hours daily for months. If you’re looking for overnight changes, this isn’t for you.

3. Consumables
   Latex diaphragms and sluice rings eventually need replacement, adding small extra costs.

4. Learning Curve
   The first week or two can feel fiddly—pumps, diaphragms, rings. But once you get it, it becomes quick and simple.

My Personal Recommendations

Having tried all three packages, here’s what I’d advise based on experience:

• If you want affordability but effectiveness:
  
  Go for the Rod System. It’s structured, precise, and gives you measurable tension.
  
  👉
  PeniMaster PRO Rod Expander System

• If you need maximum discretion for daily wear:
  
  Choose the Belt System. It’s flexible, comfortable, and invisible under clothes.
  
  👉
  PeniMaster PRO Belt Expander System

• If you want the best long-term results and flexibility (my choice):
  
  Get the Complete Set. You’ll use both systems depending on the day, and it’s far better value than buying separately.
  
  👉
  PeniMaster PRO Complete Set

Honestly, I would have been frustrated if I had only bought the belt or rod. Having both made it easier to stay consistent, which is the true key to results.

Final Motivation

After nine months, my conclusion is simple:

• PeniMaster PRO works if you commit to the process.

• The device is safe, comfortable, and backed by medical research.

• My results prove it’s not hype—I’ve seen real, measurable growth and improved confidence.

And right now, if you’re considering the investment, there’s a 15% September discount, which makes it the best time to buy.

• Complete Set: €330.65 (instead of €389)

• Rod System: €288.15 (instead of €339)

• Belt System: €271.15 (instead of €319)

With a 5-year warranty and proven design, this is not just a purchase—it’s an investment in long-term results.

👉 Secure your device here: PeniMaster PRO Official